|Where||Sydney Jewellery School, Suite 7, 2-6 Hunter Street, Parramatta|
|When||Not currently scheduled.
Click HERE to check with Sydney Jewellery School.
|Level||Open to all (some experience working with metal clay is an advantage)|
New for 2016! In this class you’ll learn how to make hollow lentils and other hollow bead shapes from metal clay.
Metal clay is a revolutionary product which comes in an easily manipulated clay form. During kiln firing (some clays can be torch fired) the binders are burnt out and the clay becomes solid metal.
Hollow beads are light and comfortable to wear, and make efficient use of your precious raw materials.
You’ll start by making textured domes and other shapes which will be assembled into hollow forms using dry construction techniques. After drilling, refining and kiln firing, your hollow beads will be polished and finished so that they’re ready to wear.
This class uses PMC3 which is .999 fine silver. The techniques covered can be used with other metal clays including sterling silver, copper and bronze.
Essential Techniques Covered
- Rolling, texturing and cutting metal clay
- Drying metal clay on dimensional forms
- Avoiding distortion when making domes
- Preparing components for assembly
- Joining metal clay in its “green” (dried but unfired) state
- Refining: filling gaps, hiding seams, matching patterns, smoothing edges
- Drilling holes
- Firing hollow forms
- Burnishing, polishing and finishing.
- 25g PMC3 .999 fine silver metal clay.
- Loan of all tools required for the techniques covered.
- Comprehensive notes.
What to Bring
You are welcome to bring your favourite texture sheets or your own metal clay toolkit if you have these and would like to use them instead of the loan equipment.